Out of stock
Fits Weatherby Vanguard rifles #2 contour 24", such as the MeatEater with a threaded muzzle*
Threaded 1/2×28 / All brakes are for .30 Caliber or smaller
ATTACHING THE ACCUBRAKE ST
1. Open the bolt, clear the chamber and magazine of all ammunition.
2. Remove the thread protector (if installed).
3. Hand screw the muzzle brake on the barrel until snug.
4. Insert a 1/8” allen wrench through the holes and rotate the brake clockwise until it is secured tightly to the barrel
DETACHING THE ACCUBRAKE ST
1. Open the bolt, clear the chamber and magazine of all ammunition.
2. Insert a 1/8” allen wrench through the holes and rotate the brake counterclockwise until loose.
3. Remove the tool and unscrew the muzzle brake by hand.
4. Install thread protector until snug. Hand tighten only, do not use any tool to tighten the thread protector
Related Products
-
-
Out of stock
-
-
